| CG-100-TO-GO Mobile Character Generator | |
 |
   |
Featuring a high-quality rackmounted computer, pull-out monitor and pull-out keyboard, the CG-100-TO-GO's aluminum case has the same footprint as our Mobile Studio units. All rackmounted components are surrounded by multiple-density foam and the hard drive is shockmounted. The CG-100 software comes pre-installed in the system.
About the CG-100 Character Generator software
The CG-100 is a PC-based character generator that produces lower thirds, text rolls, text crawls and more. In can import .TGA animations, text files, still images and even display the PC's time.
Any font installed on the system can be used by our character generators, as well as languages (i.e. if using Arabic or Hebrew, text appears right to left - the program itself is in English only). You can create and save as much text as your hard drive allows, and they can be recalled in sequence. Using the Live Operation Mode, the CG-100 can also be used as a live on-screen typewriter.
NOTE: Blackmagic Design does not support the use of Decklink cards on Dell computers, due to past incompatibilities.
Available CG-100-TO-GO Configurations:
Q: Does the CG-100 work on a MAC?
A: No, the application was designed to work in a Windows environment only.
Q: Can the CG-100 be used with other switchers?
A: Yes, it can be used as a downstream keyer. The video connection type is dependent on the Decklink™ card that is used with the CG-100. For example, the standard Decklink™ card will only key SDI and the Decklink SP™ will only key a composite or component video signal.
Q: Can I install the CG-100 in a PC with Windows Vista™?
A: The CG-100 utilizes the Blackmagic Design Decklink card. At this time, Blackmagic Design has not released drivers for Windows Vista™. We will announce this on our CG-100 product page once Vista™ compatibility has been completed.
Q: I just purchased the CG-100. How do I install it?
A: Please review the "README FILE" on your CD, it contains the proper installation steps. However, If you would like to review it now, please click this link: CG-100 Installation Guide.
Q: I see two serial numbers on the box, which one do I use during the installation?
A: Please use the 20-digit alphanumeric number as shown below:
Q: Can the CG-100 be installed on multiple computers?
A: No, the CG-100 software only includes a single user license. If you need to install it on multiple machines it will require additional licenses.
Q: Can I re-install CG-100 on a new, different computer?
A: Yes, as long as it is removed from the previous system. The key will need to be reset by Datavideo before you can re-install and re-activate the software. This process will require a minimum of one business day. Please email your 20-digit serial number and full contact details to
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
. Once we receive this information, please allow one business day for us to contact you with confirmation. Calling Tech Support will not speed up the process as key resets are handled by a remote office.
Q: When I activate the software through the SE-800's "EXT KEY" button I am seeing a green flash on the video output, is this normal?
A: The reason the green flash occurs is because the Decklink card is in output mode by default and needs to be reset. To avoid the "green flash" activate the CG-100 program before activating the EXT KEY button.
Q: How do I connect my SE-800 to the CG-100 which uses the standard Decklink™ card?
A: Refer to this diagram:
Q: How do I connect my SE-500 to the CG-100 which uses the Decklink SP™?
A: Refer to this diagram:
Q: Can I activate the CG-100 with the SE-800 external key input by a single button press?
A: Yes, please follow the directions below to setup your SE-800:
The mixers external Key button will now function as a on or off toggle. (Note: The internal key will be disabled).
 |
|
|
No data yet
© 2010 Datavideo US. All Rights Reserved HOME | WHERE TO BUY | CONTACT US | WORLD OFFICES | PRODUCT REGISTRATION | TECH-SUPPORT
