English (United Kingdom)

Español(Spanish Formal International)

 

SE-2000 five-input HD video switcher kit ITC
alt altaltalt
The Datavideo SE-2000 Kit is a stationary version of the HS-2000. It comes with the SE-2000 HD-SDI switcher, ITC-100 intercom system for 4 users, and the RKM-2000 monitor holder.
 
Inclusive in this kit, the SE-2000 HD-SDI switcher is designed for small, live production venues that use up to 5 inputs by combining 1 or 2 DVI-D computer sources and 3 or 4 HD-SDI sources.
 
Datavideo created a neat little holder, RKM-2000 that accepts one 1RU x 19” device and this kit provides a good platform for placement of a monitor. Additionally, Datavideo’s ITC-100 intercom can be mounted in the RKM-2000 holder. CG may be done with the Datavideo CG-350. PowerPoint® presentations go right in through the DVI input. The SE-2000’s multi display output includes each source, preview, program, and a digital clock display.
 
In addition, the system will store and recall 14 different logos. It also has five operator set up memories and title overlay. The SE-2000's built-in audio mixer has four audio follows video inputs (microphone or line) and two audio outputs. As with all Datavideo products the SE-2000 works on 12vDC or local power. Operating the SE-2000 is fast because every control is right on the work surface – no shifts.

alt

Features
  • Logo insertion: 28 pre-stored logos (max 128 x 96 pixels) inserted via luminance key
  • Luminance key, PIP, Freeze Image, Black
  • Tally signal output (live and next source)
  • Five individual speed keys, T bar (work in both directions) and TAKE key
  • Five user preset memories
  • 13 transitions with adjustable border width
  • Multi-image preview monitor output

Connections

Video
  • Input: 4x HD-SDI and 1x DVI-D or 3x HD-SDI and 2x DVI-D
  • Output: 2x HD-SDI, 1x HD-YUV & DVI (Multi-view)
Audio
  • 4x XLR microphone or line audio inputs
Power
  • 12V 5A DC 110/220 power supply and cord included.
Resolution
  • Input: 1920x1080i & 1280x720p
  • Output: 1080i - 720p

HGeneral

Q: Does the SE-2000 have frame delay?
A: Yes, the SE-2000 has a single frame delay. It is approximately 17 milliseconds.

Q: Can I freeze the frame on an input and dissolve to a live input?
A: Yes, you can.

Q: Is the monitor included with the kit?
A: No, sorry.

Q:  Will a relatively cheap 19” monitor ($200) work as the SE-2000 multi-view monitor?
A:  Yes, as long as your monitor has a DVI input and supports the following resolutions: 1080i @ 60Hz or 720P @ 60Hz

Q:  Can I use a VGA to DVI adapter to connect my laptop to the SE-2000?
A:  The SE-2000 is a HD switcher, which requires all inputs to be digital.  The DVI connector on the SE-2000 is a DVI-D type, which only accepts digital signals.  If a VGA to DVI adapter is used, the signal is not converted to digital but is simply gender changed to a DVI-I (analog) signal type, which the switcher will not accept.

Q: Can I connect my camera to the SE-2000 via HDMI to DVI-D cable?
A: Yes, you can.

Audio
Q: Does the SE-2000 have embedded audio?
A: No, the SE-2000 does not have embedded audio.

Troubleshooting

Q: The SE-2000 is freezing when I switch from 720p to 1080i modes and vice versa with a DVI cable attached to one of the inputs. Is there a way to fix it?
A: You must disconnect the DVI inputs from the switcher before changing modes on the SE-2000.

Q: I can’t see the multi-view output from my SE-2000 on my monitor. I may have set it to a higher resolution than my monitor supports. How can I reset the monitor output on the SE-2000 to a lower resolution?
A:  Here are the steps to reset the monitor output on the SE-2000 to a lower resolution:
• Step 1: power off your SE-2000.
• Step 2: power on your SE-2000.
• Step 3: press the menu button once.
• Step 4: press the down arrow button 6 times.
• Step 5: press the right arrow button once.
• Step 6: press the up arrow button once.
• Step 7: press the right arrow button once.
• Step 8: press the up arrow button once.
• Step 9: press the Enter button once. The switcher will reset the monitor output to a lower resolution and you will be able to see the multi-view output on your monitor.

Length12.9inches
Width16.9inches
Height3.3inches
Weight8.1pounds
  
Length330mm
Width429mm
Height85mm
Weight3.7kg
  • 12V 5A DC 110/220 power supply and cord included (SE-2000)
  • 1x DVI-D cable
  • Product manual
  • XLR-mounted gooseneck mic
  • XLR-mounted gooseneck DJ lamp
  • 12V 2.5A DC 110/220 power supply and cord included (ITC-100)

CB-10 Component Cable
CB-10 Component Cable

Products Site

Follow us on:

© 2010 Datavideo US. All Rights Reserved HOME | WHERE TO BUY | CONTACT US | WORLD OFFICES | PRODUCT REGISTRATION | TECH-SUPPORT